OpenLegislation

Division 1.3.1 The manufacturer shall supply the information required by the following table in respect of the applicable subjects for the vehicle in Annex II to Regulation (EU) No 168/2013. All relevant approvals and test reports (if available) for each subject shall be included. However, information in respect of systems, components or separate technical units need not be given here so long as such information is included in the correspondent approval certificate.

Original text. Later amendments are not shown.

Type-approval number and test report overview

Contracting parties to the Revised 1958 Agreement.

To be indicated if not obtainable from the type-approval number.

The approval authority shall complete the references for the test reports, established by regulatory acts, for which no type-approval certificate is available.

Item number and subjectType-approval number or test report numberf1 Date of issue of the type-approval or of its extension or of the test reportMember State or contracting partyf2 issuing the type- approvalf3 or technical service issuing the test report Reference to the regulatory act and its latest amendmentVariant(s)/ version(s

e.g.

B1 audible warning devices

Signed: …
Position in company: …
Date: …

Annotations

Footnotes

f1

The approval authority shall complete the references for the test reports, established by regulatory acts, for which no type-approval certificate is available.

f2

Contracting parties to the Revised 1958 Agreement.

f3

To be indicated if not obtainable from the type-approval number.

Notes on Attachment

Textual amendments

F1

Substituted by Commission Implementing Regulation (EU) 2016/1825 of 6 September 2016 amending Implementing Regulation (EU) No 901/2014 with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance).